Description
Railroad Short Name: PRR
Locomotive Features:
- Era: As-built, series 6141-6166, built 1/67 (Phase lb1)
- ACI Label placed on sixth engine compartment door
- Era: As-built, series 6167-6169, built 2/67 (Phase lb1)
- ACI Label placed on eighth engine compartment door
-
- “35-Line” cab with standard front windshields
- Standard EMD sunshades and long sunshade tracks
- Standard EMD high headlight in numberboard housing
- Front and rear MU hose catch trays with footboards
- Operating LED-lit, red-only marker lights
- 81” low short hood with plated-over handbrake location
- Early straight grabs and “flipped” NBW mounting on nose front and top; top and side grabs relocated to left side to clear cab signal cabinet
- Latched battery box doors with narrow louvers
- Latched cab sub-base doors with early hinges
- Front and rear early small deck extension
- Pivoting front and rear drop steps
- “Short” stepwells with see-through steps
- “Early” pattern walkway treadplate
- Rectangular walkway lights
- Tall clear wind wings mounted fore and aft of cab side window, both sides of cab
- Lost-wax brass Leslie SU-3L-LRO horn, center rear of number board housing
- ÂÂLarge Sinclair Excalibur “ice skate” antenna (communications) mounted on cab roof
- Standard electrical cabinet seam and bolted alternator door
- No ECAFB
- Early (smooth) blower duct housing
- Early inertial air intake grilles without drip rails
- Early (short forward taper) extended-range dynamic brakes
- Chicken-wire pattern radiator intake grill mesh
- Long walkway duct (three short stanchions)
- Front and rear straight uncoupling levers with four brackets
- End handrail set with pilot face mounted outer end rail stanchions
- 4-hose MU hose clusters with silver gladhands
- Dual early (angled) deck-mounted MU receptacles, with handrail stanchion-mounted dummy MU receptacle
- Short “Nub-Bottom” pilot face with full-width single grab iron
- Tall jacking pads with holes
- Flush-mount EFCO button
- Frame-mounted bell
- Salem air filter (accordion style)
- 4,000-gallon fuel tank with single fuel filler, single vertical fuel gauges, and round fuel gauge on both tank sides
- Detailed Flexicoil (low-mount brake cylinder) trucks with Hyatt bearing caps, and sanding lines and brackets
- Speed recorder second axle, left side
- ACI labels attached to long hood sides
- Early (3-Strap) cab signal cabinet on top of battery box, engineer’s side
- Paint colors matched to Tru-Color Paint: TCP-07 PRR Brunswick Green
- Fully-assembled
- Printed and LED-lighted number boards
- Scale sectioned treadplate detail on the walkways
- Underbody frame rail with separate plumbing and traction motor cables
- Accurate hood door and long hood detail
- Accurately profiled dynamic brake housings
- See-through dynamic brake intakes with resistor grid detail
- Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand
- Sliding cab windows
- Factory-applied wire grab irons, wire lift rings, windshield wipers, snowplows, horns, coupler cut levers, trainline hoses with silver gladhands, sand hatch covers, and much more
- Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale Type “E” knuckle couplers
- Directional LED headlights
- All-wheel drive
- All-wheel electrical pick-up
- Motor with 5-pole skew-wound armature
- Dual flywheels
- Printing and lettering legible even under magnification
- Color matched to Tru-Color Paint colors whenever possible
- Operates on Code 70, 83 and 100 rail
- Packaging safely stores model
- Minimum radius: 18”
- Recommended radius: 22”
DCC Ready Features:
- Operable using a DC power pack
- DCC-ready with 21-pin connector
Reviews
There are no reviews yet.