Description
Railroad Short Name: SCL
Locomotive Features:
- Era: As Delivered, series 2024-2037, built 9-10/71
- Road numbers 2024, 2028, 2031, 2034
- Without the “Pulling for you” slogan on battery box and cab subbase doors
- Era: Mid 1970’s – Early 1980’s, series 2024-2037, built 9-10/71
- Road number 2037
- With the “Pulling for you” slogan on battery box and cab subbase doors
- Era: Mid 1970’s – Early 1980’s, series 2038-2044, built 9-10/71
- Road number 2040
- With the “Pulling for you” slogan on battery box and cab subbase doors
- “35-Line” cab with standard front windshields
- Standard EMD sunshades and long sunshade tracks
- Standard EMD low headlight in face of short hood
- Front and rear hose catch trays
- Operating LED-lit Pyle-National “Gyralite” in numberboard housing (upper lens is standard, and lower red lens is a “UDE” light)
- Operating LED tricolor flush-mounted class lights with raised gasket
- 81” low short hood without handbrake
- Late drop grabs and standard NBW mounting on nose front and top
- Latched battery box doors with narrow louvers
- Latched cab sub-base doors with early hinges
- Front early small deck extension
- Pivoting front and rear drop steps
- “Tall” stepwells with see-through steps
- “Late” pattern walkway treadplate
- Rectangular walkway lights
- No mirrors or wind wings
- Lost-wax brass Leslie S-5T-RRO horn, center rear of number board housing.
- ÂÂMotorola ASP-16 “Firecracker” communications antenna mounted on cab roof
- Standard electrical cabinet seam and bolted alternator door
- Small ECAFB
- Late (ribbed) blower duct housing
- Early inertial air intake grilles without drip rails
- Late (long forward taper) standard-range dynamic brakes with cooling vents and “T” vent on top of roof
- Rectangular-pattern radiator intake grill mesh
- Short walkway duct (four short stanchions)
- Front and rear straight uncoupling levers with four brackets
- Handrail set with deck mounted outer end rail stanchions
- 3-hose MU hose clusters with silver glad hands
- Late deck-mounted MU receptacle
- Tall “Zig-Zag” pilot face
- Tall jacking pads with holes
- Tab-mount EFCO
- Frame-mounted bell
- Salem air filter (accordion style)
- 4,000-gallon fuel tank with single fuel filler, single vertical fuel gauges, and round fuel gauge on right tank side
- Detailed Flexicoil (high-mount brake cylinder) trucks with Hyatt bearing caps, and sanding lines and brackets
- Speed recorder second axle, left side
- ACI label placards included in polybag for optional installation by the modeler
- Fully-assembled
- Printed and LED-lighted number boards
- Scale sectioned treadplate detail on the walkways
- Underbody frame rail with separate plumbing and traction motor cables
- Accurate hood door and long hood detail
- Accurately profiled dynamic brake housings
- See-through dynamic brake intakes with resistor grid detail
- Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand
- Sliding cab windows
- Factory-applied wire grab irons, wire lift rings, windshield wipers, snowplows, horns, coupler cut levers, trainline hoses with silver gladhands, sand hatch covers, and much more
- Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale Type “E” knuckle couplers
- Directional LED headlights
- All-wheel drive
- All-wheel electrical pick-up
- Motor with 5-pole skew-wound armature
- Dual flywheels
- Printing and lettering legible even under magnification
- Color matched to Tru-Color Paint colors whenever possible
- Operates on Code 70, 83 and 100 rail
- Packaging safely stores model
- Minimum radius: 18”
- Recommended radius: 22”
DCC Ready Features:
- Operable using a DC power pack
- DCC-ready with 21-pin connector
Reviews
There are no reviews yet.